How to Start a Briggs and Stratton Pressure Washer

GoB a new Briggs and Stratton pressure washer? Here are some tips on how to start a Briggs and Stratton pressure washer, rookie mistakes, & proper usage.

Power washers are some of the most useful tools in your tool shed, especially Briggs and Stratton power washers. They’re used for thoroughly cleaning up homes, patios, backyards, and lawns. They’re great for reaching even the hard-to-reach areas of the outside of your house where the mold and mildew grow. 

Of course, pressure washers may be a bit complicated to use at first, which is why you need to learn how to start a Briggs and Stratton pressure washer and how to use it properly.

How to Start a Briggs and Stratton Pressure Washer (Avoiding Common Mistakes)

While starting up your brand-new Briggs and Stratton pressure washer is pretty easy, there are a lot of details that the beginners usually fail to observe. That’s pretty understandable since pressure washers are quite delicate and need a precise understanding of its mechanism. 

That’s why this section will focus not just on how to start a Briggs and Stratton pressure washer but also on the common rookie mistakes and how to avoid them. 

Before all of that though, let’s familiarize ourselves with the important parts that you’ll be encountering:

Those are the parts that you need to remember when learning how to start a Briggs and Stratton professional pressure washer. 

Now let’s move on to the guide on how to turn on a Briggs and Stratton pressure washer:

  1. Fill the water supply to up to 3.8 gallons.
  2. Connect all of the parts together (spray gun to the hose, and hose to the pump).
  3. Turn the machine on and take out the excess air pressure.
  4. Connect the nozzle to the spray gun.
  5. Turn on the machine.
  6. Turn the throttle up to high.
  7. Put the choke lever to Choke mode.
  8. Let it run for a while and put the choke lever to Run mode.
  9. Pull on the start handle.
  10. Pull it hard when it gets heavy.
  11. Put it back in place.
  12. Unlock the spray gun and hold the trigger to start spraying.

This is the basic process that you need to take note of when you’re learning how to start a Briggs and Stratton ready start pressure washer. The next thing that you should take note of are the common mistakes that beginners make so you know how to avoid them. 

Here are a few noteworthy ones:

  • Not wearing safety equipment

The first thing that you should always do when using a pressure washer is observe safety. A lot of beginners take the strength of a pressure washer for granted. Even when starting up a pressure washer, you need to wear safety equipment like goggles, gloves, long pants, and boots just in case the machine acts up. 

  • Not facing the gun down

Another rookie mistake that most people make would be never facing the gun down. This is a safety precaution in the event that the gun sprays out of nowhere. At least you won’t hit anything or anyone in the process.

  • Leaving the choke on Run Mode after the first pull

There are times when the machine won’t immediately turn on after the first pull in steps 9 and 10. Beginners would usually leave the Choke on Run mode and try pulling again. However, you should always put the choke lever back to Choke then to Run again before you try pulling a second time. 

  • Not removing excess air pressure

We cannot emphasize enough not to skip step 3 (removing excess pressure from the gun) as this ensures that the water won’t just come up suddenly due to the extra pressure present. There are actually some rookies who skip this process as they don’t deem it necessary at tips. Again, do not skip step 3. 

Tips When Operating the Machine

Now that you know how to start a Briggs and Stratton pressure washer and the common mistakes to avoid, let’s proceed to something a little deeper– how to use a Briggs and Stratton pressure washer. 

Here are a few tips that you can take note of:

  • Connect your pressure washer to the water source via a garden hose.
  • Use a cleaning solution mixed with the water in your water tank.
  • Make sure the spray tip is 2 feet away from the surface you’re spraying.
  • Don’t stay too long in one spot.
  • Spray at a 45-degree angle.

The Easiest Briggs and Stratton Pressure Washer (Best Washer for First-Timers)

Briggs & Stratton 020685 3100 PSI 2.5GPM Pressure Washer
Briggs & Stratton 020685 3100 PSI 2.5GPM Pressure Washer

Now that you know the basics of starting and using a pressure washer, we’d like to talk about one that really fits beginners as it’s really easy to use. 

This is the Briggs & Stratton 020685 3100 PSI 2.5GPM Pressure Washer. It is extremely easy to use because it is so simple to assemble and also has great maneuverability.  It’s also really strong and precise with regard to water spraying. 

Here is a breakdown of some of the highlights of the product:

Best Features:

  • 2.5 max GPM 
  • 3100 PSI pressure
  • Low maintenance 875EXi Series engine
  • Does not need too much oil change
  • All steel base for the pump


With this complete guide, you now know how to start a Briggs and Stratton pressure washer, how to operate it, and which one is the best for beginners, you’re now ready to buy one or use the existing one you have.

We hope you enjoyed the guide and always remember to observe proper usage of your pressure washer and safety precautions.

Mattie Keyes

Hi there! This is Mattie. When I am not making DIY projects for my house, I spend most of my time researching and writing reviews of different products that you can buy online. I am an office worker turn full-time blogger, and I hope to help other homeowners like me on how to improve and reinvent your home using the best ideas and equipment.

Click Here to Leave a Comment Below 0 comments