How to Convert a Pressure Washer into a Sewer Jetter

If you buy an item via links on this page, we may earn a commission. Our editorial content is not influenced by commissions. Read the full disclosure.

Need to buy a sewer jetter to clean up your piping system? Why not learn how to convert a pressure washer into a sewer jetter? Here are some tips on how.

Have you ever found yourself in need of cleaning or draining your piping system because it isn’t flowing like usual? You’re not the only one as it’s a pretty common problem in most residential areas and even a lot of commercial areas.

Now, professionals would probably tell you to buy a sewer jetter because these are the common machines that are used for this purpose. However, you don’t need to spend needlessly on a new sewer jetter if you have a pressure washer. All you have to do is learn how to convert a pressure washer into a sewer jetter

We will teach you how in a few easy steps. 

What Is a Sewer Jetter? 

Sewer Jetter Hose Kit
Sewer Jetter Hose Kit. Via:

Before we teach you how to turn your pressure washer into a sewer jetter, you need to know how a sewer jetter works so that you can understand the similarities between it and a pressure washer. In a nutshell, a sewer jetter is a high-pressure water jet that can spray large amounts of water in a drain system.

It makes use of a pump, hose, engine and a bunch of nozzles to spray water at high pressures. Basically, the engine powers up the pump and you connect the hose to the pump. From there, you connect the nozzle to the hose and spray water directly to the piping system. They actually work the same way as pressure washers, which is why it is so easy to convert pressure washer to sewer jetter.

How to Convert a Pressure Washer into a Sewer Jetter (8 Steps)

Now that you know what a sewer jetter is and how it works, let’s go through the steps on how to turn your pressure washer into a sewer jetter. The first thing that you need to know about this process is that it requires a conversion kit. These kits provide all the necessary tools and parts that can allow you to fully turn your pressure washer into a sewer jetter. These kits can be bought online for around less than $300. 

These are some of the important things that you’ll find in a typical conversion kit:

  • Ball valves
  • Jetter hose
  • Nozzles (usually laser, rotating, and ram nozzles)
  • Jumper hose
  • Hose reel

With that out of the way, let’s move on to the steps on how to convert a pressure washer into a sewer jetter:

  1. First attach the pressure washer hose to the pressure.
  2. Take out the spray gun from your pressure washer hose and replace it with the ball valve.
  3. Attach the ball valve to the jumper hose.
  4. Connect the other end of the jumper hose to the end of the jetter hose.
  5. Make sure that the jetter hose is already wrapped around the hose reel.
  6. Put the right nozzle on the end of the jetter hose.
  7. Place the jetter hose into the pipe that you want to clean.
  8. Turn on your pressure washer to start the cleaning.

Those are the eight steps that can help you turn your pressure washer into a sewer jetter. When you have already turned on your converted sewer jetter, you will want to use your hose reel to move the nozzle of the jetter hose lower into the piping system so that you can clean even the deepest parts. 

From there, you can use the hose reel to pull it back up when you’re done. Also, you will want to take note that these kits can usually take up to 4,000 PSI of pressure but not really anything above that. 

If you are looking for the best power wash to buy, here’s a good list to start your search. Click HERE!


As you can see, it’s not that hard to convert your pressure washer into a sewer jetter. All you need is just one sewer jetter conversion kit and 8 steps. It’ll probably only take just 5 minutes to assemble. Once you follow those 8 steps, the only thing left for you to do is learn how to deep clean your piping system and you’re all good. 

So, if you have a piping system that needs cleaning or unclogging, just whip out your trusty pressure washer and buy a conversion kit. After that, refer back to this guide and start cleaning. You’ll be able to save up on a lot of money rather than buying a whole new sewer jetter.

TOP 5 most viewed articles in month

In compiling a top-5 list of this month's most popular articles:

Mattie Keyes

Hi there! This is Mattie. When I am not making DIY projects for my house, I spend most of my time researching and writing reviews of different products that you can buy online. I am an office worker turn full-time blogger, and I hope to help other homeowners like me on how to improve and reinvent your home using the best ideas and equipment.